Clawd Desk Buddy
Flash the firmware from your browser, then set up WiFi in the same window.
Before you start
The board has to be the touch version
This firmware needs the Waveshare ESP32-C6-Touch-LCD-1.47, the version with touch.
The similar looking ESP32-C6-LCD-1.47 without touch is not supported. It uses different pins and the display stays dark.
Use a desktop browser
The flasher works in Chrome, Edge and Firefox 151 or newer on a computer.
Safari, iPhone and iPad are not supported, because they cannot talk to USB serial devices.
Install
- Connect the board to your computer with a USB-C data cable.
- Press the button below and choose the serial port of the board.
- Wait until flashing is done, then enter your WiFi name and password when asked.
This browser cannot talk to USB serial devices. Please open this page in Chrome, Edge or Firefox 151 or newer on a computer.
This page has to be opened over HTTPS to use the flasher.
After flashing
Open http://clawd.local on a phone or computer in the same WiFi to change expressions, colors, brightness and the sleep schedule.
Skipped the WiFi step? The buddy opens its own WiFi network Clawd-Setup. Join it and choose your home network there.